-
Application of Probe Holder in Ultrasonic Measurement of Curved Surface Workpiece
Due to the typical shape and small thickness of stamping parts, we usually use a small diameter delay line probe to complete the measurement. Because of curve surface, the measuring surface of the workpiece is very small, and the pointed and narrow end of the delay tip makes it difficult to keep the probe perpendicular to the measuring surface.
2024-08-09 admin
-
Thickness Measurement of Fiberglass Pipes and Tanks
Is it difficult for you to measure fiberglass pipes or tanks? Let YUSHI ultrasonic thickness gauge help you. Ultrasonic thickness gauges can be used in a variety of fiberglass product inspection. During the inspection, the thickness gauge can measure the thickness of the workpiece from one side.
2024-07-30 admin
-
YUSHI PM5 Gen2 Ultrasonic Thickness Gauge Free Drop Test
We did the drop test of YUSHI PM5 Gen2 ultrasonic thickness gauge from a height of 1.22 meters. After 26 free drop tests,the appearance and performance of the PM5 Gen2very well, the measurement value
2024-07-27 admin
-
Application of Ultrasonic Thickness Gauge in Thickness Measurement of Electrical Material Laminated Products
We received samples of electrical laminate products from electrical material manufacturers, with thicknesses ranging from 0.5mm to 100mm. The quality control of laminate products has relevant standards, which have clear requirements for nominal thickness and allowable deviation. Using an ultrasonic thickness gauge to measure whether the material thickness meets the standard and uniform is crucial to ensure the safe operation of the circuit and the performance stability of the equipment.
2024-07-23 admin
