Welcome to YUSHI INSTRUMENTS website.
 简体中文 English  Deutsch

  +86 18602468800
  athena.w@yushindt.com yushi00ndt
Hot products:Thickness Gauges | Ultrasonic Flaw Detectors | Coating Thickness Gauges | X-Ray Film Viewers
   Categories
   Contact Us

 Address: No.9, Shenbei Road,  Shenbei New District,           Shenyang, China 110136

 Phone: +86 18602468800

 E-mail: athena.w@yushindt.com

 Website: www.yushindt.com

 
 
   PM-5 Series High Precision Ultrasonic Thickness Gauges
PM-5 Thickness Gauges
Product Name:  PM-5 Series High Precision Ultrasonic Thickness Gauges
Model:  PM-5/PM-5DL
Views:  

Application::  Very suitable for auto body sheets, fire /security doors, fire extinguishers, metal railings, cooking supplies and thin material thickness measurment.

 

Brief Introduction:  2.4QVGA(320×240)Color OLED Display, 0.001mm Resolution,Measuring Low Limit to 0.2mm. A/B-Scan, Through Coating Measurement, e.g. Painting on the Substrate, the net thickness of the substrate can be measured without removing paintings. Unique Multiple-Wave Verify Mode, All the Thickness Values Have Been Checked 3 to 9 Times of Echos, Which Makes the Result More Reliable and Accurate.

   

 PM-5 Thickness GaugesPM-5 Thickness Gauges
PM-5 Thickness Gauges
PM-5 Thickness Gauges

Application of PM-5 Series Precision Ultrasonic Thickness Gauges: Very suitable for auto body sheets, fire /security doors, fire extinguishers, metal railings, cooking supplies and thin material thickness measurment.

Specifications of PM-5 Series Precision Ultrasonic Thickness Gauges:

Display 2.4QVGA(320×240)True Color OLED Screen, Contrast 10000:1
Operating Principle Ultrasonic Thickness Measurement with Single Crystal Delay Probe
Measuring Modes and Range(Steel)
Interface-Echo Mode 1.5mm-27mm, for thick material
Echo-Echo Mode 0.25mm-13.5mm, for thin material and measure through the coating
Multiple Echo Verify Mode 0.25mm-9mm, All the thickness values have been checked through 3 to 9 times of echos, which makes the result more reliable and  accurate
Auto Mode 0.25mm-27mm, The instrument select the measuring mode automatically according to the different material being tested
Display Modes
A-SCAN Displays the whole RF echo or half-waveform after rectified
B-SCAN Real time B-Scan, displays the profile of the workpiece
Big Thickness Values The conventional display of the thickness values
Difference/Thickness thinning rate Displays the difference between the real thickness value and the preset thickness values, and the percentage of the thinning values.
Min./Max. Capture Displays the current thickness values, Min. value and Max. values at the same time
Measuring Resolution 0.001 mm or 0.01mm (0.0001 in or 0.001 in)
Units Inch or Millimeter
Gain Real time continuously adjustable
Update Rate Selectable 4HZ,8HZ,16HZ
Material Velocity Range 500-9999m/s,0.0197-0.3937in/us
Language Chinese, English, French, Germany, Japanese
Alarm Setting Dynamically change the color of thickness values when the measuring value exceeds the up limit or low limit of preset
Power 2 AA size batteries, Operating time is more than 35 hours
Instrument Shut-off Selectable ALWAYS ON or AUTO OFF after 5, 10 or 20 minutes of inactivity
Working Temperature -10℃ ~+50℃
Size 153mm × 76mm ×37mm(H ×W ×D)
Weight 280g including batteries
Standard Configuration Ultrasonic Thickness Gauge, Delay Line Probe, Probe Cable, Communication Cable, Instrument Case, Communication Software, User Manual, Packing List, Warranty Card
Optional Accessories Step Calibration Blocks, Communication Software and Rubber Bumpers.
PM-5 Thickness Gauges
 
 
 
 

CONTACT US

Mobile: +86 18602468800

You can also leave your contact information to us, so we can offer

our better and faster services to you.

Add:No.9, Shenbei Road, Shenbei New District, Shenyang, China 110136

E-mail : athena.w@yushindt.com

Web : yushindt.com